Auto wastewater pre-treatment machine mechanical bar screen

June 06 12:06 2023

HLCF Mechanical Bar Screen is provided with several special-shaped teeth which are assembled on the teeth axis based on certain ordering, forming the sealed teeth chain. The lower part is installed in the water inlet. If the chain wheel rotates directionally with even speed, the whole rake chain will move accordingly. Under such circumstance, the solid sundries attached on the tooth will be separated from liquid and the fluid will low away through the gap. When rake chain arrives at its upper end, each group of rakes will carry on self cleaning by dropping out most of the solid material under gravity and guideline rail, while the rest of the solid will be tidied clean by back running brush.The whole process is carried out continuously and automatically so as to achieve the goal of solid-liquid separation.

1.The driving unit is directly driven by cycloidal gear reducer or helical gear reducer which shows the nature of working stability, low noise, big load capability    and high efficiency in conveying.

2.Simple structure with compact size, easy to install and move. Device can self-clean up while working, easy to maintain.

3.Easy to operate, can be controlled directly on the spot or remote.

4.Include overload protection device, machine will shut down automatically when malfunction happens to avoid damage.

5.When the device width exceeds 1500mm, will be made into parallel machine to ensure the overall strength.

This is a kind of advanced solid-liquid separation device in water treatment, which can continuously and automatically remove debris from wastewater for sewage pretreatment. It is mainly used in municipal sewage treatment plants, residential quarters sewage pretreatment devices, municipal sewage pumping stations, waterworks and power plants, also it can widely be applied to water treatment projects of various industries, such as  textile, printing and dyeing, food, fishery, paper, wine, butchery, curriery etc.

                                           Model /Parameter HLCF-500 HLCF-600 HLCF-700 HLCF-800 HLCF-900 HLCF-1000 HLCF-1100 HLCF-1200 HLCF-1300 HLCF-1400 HLCF-1500
Device Width B(mm) 500 600 700 800 900 1000 1100 1200 1300 1400 1500
Channel Width B1(mm) B+100
Effective Grille Spacing B2(mm) B-157
Anchor Bolts Spacing B3(mm) B+200
Total Width B4(mm) B+350
Teeth Spacing b(mm) t=100 1≤b≤10
t=150 10<b≤50
Installing Angle α(°) 60-85
Channel Depth H(mm) 800-12000
Height Between Discharge Port and Platform H1(mm) 600-1200
Total Height H2(mm) H+H1+1500
Back Rack Height H3(mm) t=100 ≈1000
t=150 ≈1100
Screen Speed v(m/min) ≈2.1
Motor Power N(kw) 0.55-1.1 0.75-1.5 1.1-2.2 1.5-3.0                
Head Loss(mm) ≤20(no jam)
Civil Load P1(KN) 20 25
  P2(KN) 8 10
  △P(KN) 1.5 2

Note:Pis calculated by H=5.0m,for every 1m H increased,then P total=P1(P2)+△Pt:rake tooth pitch coarse:t=150mmfine:t=100mm

Model /Parameter HLCF-500 HLCF-600 HLCF-700 HLCF-800 HLCF-900 HLCF-1000 HLCF-1100 HLCF-1200 HLCF-1300 HLCF-1400 HLCF-1500
Flow Depth H3(m) 1.0
Flow Velocity V³(m/s) 0.8
Grid Spacing b(mm) 1 Flow Rate Q(m³/s) 0.03 0.04 0.05 0.06 0.07 0.08 0.08 0.09 0.10 0.11 0.12
3 0.07 0.09 0.10 0.12 0.14 0.16 0.18 0.20 0.22 0.24 0.26
5 0.09 0.11 0.14 0.16 0.18 0.21 0.23 0.26 0.28 0.31 0.33
10 0.11 0.14 0.17 0.21 0.24 0.27 0.30 0.33 0.37 0.40 0.43
15 0.13 0.16 0.20 0.24 0.27 0.31 0.34 0.38 0.42 0.45 0.49
20 0.14 0.17 0.21 0.25 0.29 0.33 0.37 0.41 0.45 0.49 0.53
25 0.14 0.18 0.22 0.27 0.31 0.35 0.39 0.43 0.47 0.51 0.55
30 0.15 0.19 0.23 0.27 0.32 0.36 0.40 0.45 0.49 0.53 0.57
40 0.15 0.20 0.24 0.29 0.33 0.38 0.42 0.46 0.51 0.55 0.60
50 0.16 0.2 0.25 0.29 0.34 0.39 0.43 0.48 0.52 0.57

0.61

 

 

article source: https://www.hollyep.com/auto-wastewater-pretreatment-machine-mechanical-bar-screen-product/

Media Contact
Company Name: Yixing Holly Technology Co., Ltd.
Email: Send Email
Phone: 86-510-87994422
Country: China
Website: https://www.hollyep.com/